看了又看

The WEP 926LED V3 is a compact digital soldering station that is made for beginners and hobbyist who are looking to pick up soldering without budget compromises.

Solder Sucker – Essential for desoldering
Lead-free Solder Wire – Essential for forming electrical connections
5 x Soldering Tips – Essential for soldering
Tweezers – Essential for grabbing small components
You can get started with soldering immediately with the accessories we included in our kit.

Takes minimum desk space, never lose your holder again, made from highly temperature resistant materials, surrounding protected with metallic parts to prevent damages by accidental solder splashes.

Our control knob allows temperature adjustment from 392°F to 896°F

The soldering iron is powered by our quality 60W ceramic heating element, and the soldering iron can heat to operating temperature in less than a minute.

The PID chip stabilizes the temperature in real-time to make sure you don’t have to wait in between every solder joint.

This function makes the soldering iron idle at a lower temperature setting when you stop using the soldering iron for longer than 10 minutes. This will reduce unnecessary wear for your soldering tip, and heating element last longer.

You can toggle the digital display’s temperature unit via the toggle button on the station. This way, you can follow soldering tutorial taught in both °C or °F.




Model number | WEP 926LED V3 |
Rated voltage range | 110V-127V/AC, 60Hz |
Maximum power | 130W |
Rated power | 18W |
Main unit dimensions | L6.3*W4.84*H4.45in ±0.2in |
Operating ambient temperature | 0~40°C/32°F~104°F |
Temperature range | 200°C~480°C/392°F~896°F |
Display | LED Nixie Tube |
Tip to ground resistance | <2ohms |
没有评价数据